NED is CLOSED :(....but look inside....

[03COBRABOY]

i need to stop going there....i keep gettin better and better at driving my car....the pulley cars are goin to hate me!!!!

first run...11.90@117.57 on a 1.82

NEW BEST!!! 11.73@119.36 on an shitty 1.72

last run and best mph of the day....11.85@120.90 on a 1.71

track was NOT hookin...if i had my 1.6x it woulda been a 11.6x....dammit...still happy though!!! 5 months ot mod!!!

[Brad S]

i need to stop going there....i keep gettin better and better at driving my car....the pulley cars are goin to hate me!!!!

first run...11.90@117.57 on a 1.82

NEW BEST!!! 11.73@119.36 on an shitty 1.72

last run and best mph of the day....11.85@120.90 on a 1.71

track was NOT hookin...if i had my 1.6x it woulda been a 11.6x....dammit...still happy though!!! 5 months ot mod!!!


I knew that TB adn H pipe would help you out a bit, do the boost bypass damnit.

[03COBRABOY]

I knew that TB adn H pipe would help you out a bit, do the boost bypass damnit.

i dunno if the boost bypass works....i had it on the last 2 trips...took it off at the dyno on thursday...i guess i shoulda tried to see....owell

[Brad S]

i dunno if the boost bypass works....i had it on the last 2 trips...took it off at the dyno on thursday...i guess i shoulda tried to see....owell

It def does a little something when you're shifting, def a good mod for a drag racer.

[MCas7]

Great times. Imagine if you put a pulley on that thing.

Hey, did anyone see this happen? I didn't go today, wish I did.

http://www.actionracingphotos.com/photos/2004/103104NEDTIMETRIALS/images/1031_DSC0496.jpg

[03COBRABOY]

YEAP!! and i think its the same car that did it at Tasca Day a few weeks ago...LOLOLOLOLOLOLOL

[MCas7]

lol, I think someone needs to give him a lesson on c-clips.

[03COBRABOY]

lol, I think someone needs to give him a lesson on c-clips.

maybe he has......ELIMINATORS!!! hahahahaha

[383BackInBlack]

whats up with your car jake, your MPH is alllll over the place

[03COBRABOY]

whats up with your car jake, your MPH is alllll over the place

how so? 117.5, first run and it sucked...then i adjusted tire pressure and 60'ed better and went 119. i know i was shifting quicker and higher rpm too. and then 120.9.....maybe a tail wind? it should be a solid 118-119 trap speed. it is a new combo and i was still learning. when i went a couple weeks ago and was on like 10+ passes on my last setup i went 117 for 3 passes and 118.0x for the last one.

[96Z28SS]

I saw you up there Good Job, I was having a problem launching but I thought the track was hooking real good I was bogging every run. I think there were 6 guys that broke there rear ends Yesterday that to me means the track was hooking.
I was all set to run the juice and the NOS solenoid died on me I could only purge. I was very pissed. Only got 3 runs Best was a 1.942 60' 12.280 @ 119.97 almost 120mph not bad for a 3770 lbs n/a motor.

[H3llphyre]

I saw you up there Good Job, I was having a problem launching but I thought the track was hooking real good I was bogging every run. I think there were 6 guys that broke there rear ends Yesterday that to me means the track was hooking.
I was all set to run the juice and the NOS solenoid died on me I could only purge. I was very pissed. Only got 3 runs Best was a 1.942 60' 12.280 @ 119.97 almost 120mph not bad for a 3770 lbs n/a motor.

re-route purge into intake...

[96Z28SS]

re-route purge into intake...

Yeah I know but I had no tools and Id have to re wire some stuff cause the ECU controls the solenoids and the fuel, not so easily done.

[H3llphyre]

Yeah I know but I had no tools and Id have to re wire some stuff cause the ECU controls the solenoids and the fuel, not so easily done.

I was kidding anyway, although, i suppose it would have worked. Haha. You go to the track without a basic set of tools? Daring.

[383BackInBlack]

how so? 117.5, first run and it sucked...then i adjusted tire pressure and 60'ed better and went 119. i know i was shifting quicker and higher rpm too. and then 120.9.....maybe a tail wind? it should be a solid 118-119 trap speed. it is a new combo and i was still learning. when i went a couple weeks ago and was on like 10+ passes on my last setup i went 117 for 3 passes and 118.0x for the last one.

3mph is a HUGE spread in trap speed......your tire pressure should have little to no effect on it either.

shifting quicker usually wont make a huge difference either, but the RPM can....but 3mph or almost 4mph is alot

just didnt know if you were adjusting something or fucking with shit while you were at it

[TunedPort 335]

I was kidding anyway, although, i suppose it would have worked. Haha. You go to the track without a basic set of tools? Daring.

Two times for me. SBC :worship2:

[03COBRABOY]

3mph is a HUGE spread in trap speed......your tire pressure should have little to no effect on it either.

shifting quicker usually wont make a huge difference either, but the RPM can....but 3mph or almost 4mph is alot

just didnt know if you were adjusting something or fucking with shit while you were at it

im not counting that first tun..it was bad..

[Don's Bolt]

Drive down to Englishtown on Friday
JDM is having a free track day friday open to Cobras and Lightnings

[03COBRABOY]

Drive down to Englishtown on Friday
JDM is having a free track day friday open to Cobras and Lightnings

damn...wish i knew earlier don....u could tow me there...lol