Jesse or anyone, part request.

[Brad S]

99-01 cobra intake. anyone?

[Blackwidow]

I have some bubble gum?




:eh:

[Mr Joshua]

trade you strait up for the full eaton setup :D
~J
you'll find one here for $350 Kar Kraft (http://www.karkraft.com/performance_parts.htm)

[Brad S]

Originally posted by Lil RedCorvette
I have some bubble gum?




:eh:

We could melt the vette down....

[Superskwrl]

Originally posted by Black99Cobra
trade you strait up for the full eaton setup :D
~J
you'll find one here for $350 Kar Kraft (http://www.karkraft.com/performance_parts.htm)


Wow, thats the cheapest i've seen those intakes

[FATBLOCKMARO]

Originally posted by Brad S
99-01 cobra intake. anyone?


ill see what i can do mon

[Brad S]

Originally posted by FATBLOCKMARO
ill see what i can do mon

Ok let me know, just curious on the price of just the intake, dont need the bottom half, dont need injectors, dont need TB. :worship2:

[Mr Joshua]

you just need the intake hat?
~J

[Brad S]

Originally posted by Black99Cobra
you just need the intake hat?
~J

Yes.

[Mr Joshua]

Originally posted by Superskwrl
Wow, thats the cheapest i've seen those intakes
yea, lower, upper, including, rails, injectors, and T/B..
looks like it comes with a TPS, and an IAC..
~J

[Superskwrl]

That place must get the warranty'd motors and ford overstock, i almost fell out of my chair when i saw the 5.0 truck lowers for 30$, they go for 50 used on the corral

[Brad S]

Forget it, I dont need this now, this project has my head spinning.

[bottledbird68]

Originally posted by Brad S
Forget it, I dont need this now, this project has my head spinning. I'm curious though now, where were you heading with this one? :eh:

[Superskwrl]

Originally posted by bottledbird68
I'm curious though now, where were you heading with this one? :eh:


I'd assume he's thinkin of goin to a centrifigal blower, which i'd think is alot more costly than he originally though

[Brad S]

Originally posted by bottledbird68
I'm curious though now, where were you heading with this one? :eh:

Had a deal going on an F-1 procharger. Procharger has a kit coming out with all the bracketing and whatnot, but they cant put the package together because they can't figure out how to mass produce the sheet metal intake its got. I called them and they said they could send out everything, but the intake at this point is going to cost almost 1k, which is too much for me. So I was thinking about pulling the eaton and slapping that on, but then I realized the TB location is different. then I noticed on my motor intercooler fluid piping would be getting in the way. So all in all to do this without prochargers kit would include alot of fabrication. I could always just pull the eaton, gut it, and run it like that, but thats so bootleg I dont even wanna talk about it.

[bottledbird68]

Gotcha :thumbsup: Back to plan B, or should I say plan K :cool2:

[540Malibu]

a fabrication/welding shop could do that upper intake fro about 300 most likely.

[Brad S]

Originally posted by 540Malibu
a fabrication/welding shop could do that upper intake fro about 300 most likely.

Dont tell me that please.

[Superskwrl]

Originally posted by Brad S
Dont tell me that please.


Call Hoagans, the cheapest Fab'd manifold i have ever seen is for the 2v and its 1500, the aluminum alone would cost 2-300

[Blackwidow]

Dont listen to them .. lets make an intake out of hotdogs and cheese

we could do it for under $10

[Mr Joshua]

Originally posted by Lil RedCorvette
Dont listen to them .. lets make an intake out of hotdogs and cheese

we could do it for under $10
do it up with some ketchup and mustard..
~J