how hard are heads

[white91formula]

how hard is it to replace the stock tbi heads off my bird with tpi heads ?


it needs valve seals anyways and i am upgrading to tpi, so i figured i would just throw on some tpi heads and a l98 cam, but how hard is it to replace heads anythign a novice is capable of doing with limited tools ?

[igotasweetride]

not sure what kind of bolts hold it on, but as long as you know how to get everything off the heads, then you can do the heads. not that hard at all, just time consuming. did you check to see if you're going to have to get different length pushrods? are the new heads complete and ready to bolt up?

[white91formula]

i assume that they are ready to bolt on, they are from tunedport335, they are this tpi heads off the camaro

[H3llphyre]

haha, i thought the title of this thread meant something else... I was gonna say it depends if they are cast iron or aluminum... *SMIRK*

[white91formula]

Originally posted by H3llphyre
haha, i thought the title of this thread meant something else... I was gonna say it depends if they are cast iron or aluminum... *SMIRK*

:lol: someone has their mind in the gutter